Maintenance And Cleaning; Repair And Customer Service - Hefter Systemform TF M-Serie Manual De Instrucciones

https://www.supplychimp.com
4. REFERENCE PART

4.4. Maintenance and cleaning

Regular and correct cleaning will contribute to a long life cycle of the machine with
high quality.
Therefore, it is important to clean the machine regularly – especially to remove
any possible paper dust and to clean the folding wheels.
⇒ Before cleaning the machine it must be switched off and the power cord must
be unplugged
⇒ The transport rollers, the running surface and the feed stop must be cleaned
regularly.
⇒ Clean the machine only with a damp, non fuzzy cloth; the best would be using
the special cleaner for rollers (2800020) offered by HEFTER.
IMPORTANT:
Please do not use any aggressive cleaning material! The manufacturer does not
take any responsibility for any other cleaning material.
CAUTION:
Take care that no liquids get into the machine!

4.5. Repair and customer service

Hefter Systemform is always available to you in case of any questions of these
folders TF M series or if service support is needed (www.hefter.de).
Please contact your local retailer directly.
You can find the addresses and phone numbers on page 19 of this manual or on
the label at your machine.
18