Introduction; General Information; User Information - Hefter Systemform TF M-Serie Manual De Instrucciones

https://www.supplychimp.com

1. INTRODUCTION

1.1. General information

The folder TF M series is a folding machine which has been designed for the office
environment. It can process documents with different widths as well as various fold types.
The different fold types can be adjusted by the fold plates.

1.2 User information

The folder TF M series is a folding machine which are exclusively designed &
manufactured for the folding of paper. Any other use is not according to its specifications.
The manufacturer/supplier is not liable for any damage resulting from the use of these
machines in any way other than the use for which it is intended.
Use according to its specifications also includes the consideration of the operating manual
and the compliance with the maintenance instructions.
Any service, repair and maintenance must only be performed by a trained technician of the
manufacturer / distributor or by authorized persons.
The folder TF M series is a table top machine and can, therefore, be placed onto an
existing table or a cabinet with a plane, scratch resistant and antislip surface. There are no
special requirements to insure stability during operation.
The mains voltage must correspond to the indication on the type plate and the power.
Just printed documents must be dried completely before they can be processed. Otherwise
the rollers will get dirty.
Very bent or wavy sheets must be smoothed before the folding process begins.
2