Preparation For Using The Folder; Control Elements - Hefter Systemform TF M-Serie Manual De Instrucciones

https://www.supplychimp.com

2. PREPARATION FOR USING THE FOLDER

2.1 Names of the control elements
1. Main switch (= rear)
+ Socket for the power connection
+ fixing for the safety device
Paper pressure spring
2.
+ Adjusting wheel for the paper feeding angle
3. Feeding station (incl. lever)
4. Adjustment of paper width ( incl. clamping lever)
5. Guiding plate for the daily mail
6. Flap including opening lever
for the paper jam removal
7. Drawer for the paper stacking
8. Display and control unit
Adjusting wheels for the fold plates
9. P osition marker A for the
first fold plate (= Quickadjustment incl. closing pusher)
Vernier adjustment A
10. Position marker B (=Quickadjust.) for
second fold plate (incl. closing pusher)
Vernier adjustment B
Display and control unit for TF MINI plus
11. Display
a. Display for sheet counter
b. Countdown information
c. Display for machine status
d. Display for the speed
12. Start / Stop button
13. Speed buttons
a. >
b. >> = Increase
14. Adjustment for pre-counter
a. 1000 preset
b. 100 preset
c. 10 preset
d. 1 preset
15. Reset button
= Reduce
4