Mopping Recommendations; How To Use; Sweeping; Emptying The Dust Bin - Steamfast SF-825 Guía Para El Usuario

Mopping Recommendations

Accessory Floor Type
• Stone
Microfiber Pad
• Slate
(Super absor-
• Vinyl
bent pads for
• Laminate
every day use)
• Marble
• WARNING: Do not use on unsealed hardwood or unglazed
ceramic surfaces. Surfaces that are not properly sealed may
be warped or damaged by exposure to heat and moisture.
• Care should also be taken when steaming sealed hardwood
floors, as prolonged exposure to steam in a single spot may
cause damage and discoloration. To avoid this, keep the
Everyday Sweeper Steamer in constant motion on these
surfaces, and place it back on Resting Pad when idle.
• Steam may remove the sheen from some floors that have
been treated with wax.
• Extremely rough textured floors may tear or damage
Microfiber Pads.
• Before steaming any flooring, it is recommended to
consult the manufacturer's guidelines. For flooring in
question, always test on a small inconspicuous area
before proceeding.
10 English
• Sealed Hardwood
• Bamboo
• Glazed
Ceramic Tile

SWEEPING

Begin by sweeping the surface you intend to clean. The
Sweeper function will pick up most dirt, dust, and hair that a
typical steam mop leaves behind.
NOTE: Not effective on carpet, for
use on hard floor surfaces only.
1. To initiate Sweeper Brush,
press Sweeper Brush Power
Button (Figure 1). Thoroughly
sweep the entire surface to
remove all debris.

EMPTYING THE DUST BIN

1. Remove Dust Bin by taking
hold of the two recessed ar-
eas and pulling up, releasing
Dust Bin from the unit
(Figure 2).
2. Press Dust Bin Release
Lock (Figure 3) to open Bin
for easy disposal. Replace
by firmly pressing Dust Bin
back into place on Sweeper
Steamer Head.

How to Use

Figure 1
Figure 2
Figure 3