Microfiber Pads - Steamfast SF-825 Guía Para El Usuario

MICROFIBER PADS

1. Lay one Microfiber Pad on a flat surface, with white fastener
strips facing upward.
2. Align Sweeper Steamer Head above Microfiber Pad (Fig-
ure 1). Make sure Sweeper Steamer Head is oriented with
Microfiber Pad as shown, ensuring Microfiber Pad does not
extend beyond the line illustrated (Figure 2).
3. Press Sweeper Steamer Head firmly down onto Microfiber
Pad. Fastener strips will adhere to Pad Grips on underside
of Mop Head. The Microfiber Pad is now attached and
ready for use.
4. To remove, use your foot to press down on Microfiber Pad
while simultaneously pulling the unit up and away from
Microfiber Pad (Figure 3).
WARNING: Use care when handling a recently used Microfiber
Pad, as it may still be hot.
White
Fastener
Strips
Figure 1
Initial Setup
Figure 2
Figure 3
English 9