Carton Contents; Assembly - Delta MS250 Manual De Instrucciones

3
Fig. 1
Remove the miter saw and all loose items from the carton.
Do not lift the miter saw by the switch handle. This action can cause misalignment. Always lift the machine
by the base or the carrying handle.
1. Miter Saw Arm
2. Miter Saw Base
3. Dust Bag
4. 1/2" Blade Wrench
5. 5mm Hex Wrench
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted
surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for
this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

CARTON CONTENTS

1
4

ASSEMBLY

ASSEMBLY TOOLS REQUIRED
* 5mm hex wrench
* 1/2" Blade wrench
* Phillips head screw driver
* A square to make adjustments
ASSEMBLY TIME ESTIMATE
Assembly time for this product will be about 30 minutes
5 6
6. Table Lock Handle
7. Bevel Pointer
8. M5x.8x10mm Pan Head Screw with an
M5.3 Flat Washer
(Supplied)
(Not supplied)
8
2
7
8
.