Troubleshooting - Nilfisk VHW310 Manual De Instrucciones

VHW310 - VHW311
Problem
The vacuum cleaner suddenly stops
Dust leaks from the vacuum cleaner
Electrostatic current on the vacuum
cleaner
US
C392

Troubleshooting

Cause
Clogged primary filter
Clogged vacuum hose
Circuit breaker activation
The filter is torn
Non-existent or inefficient grounding
12
Remedy
Shake the filter. Replace it if this is not
sufficient.
Check the vacuum hose and clean it.
Check the setting.
Check the motor electrical input.
Empty the container.
Contact an authorized after-sales
service center if necessary.
Replace it with another of identical
type.
Check all ground connections.
Especially check the connection at the
inlet.
01/2015