Monitor Settings - Blackmagic Design SmartView Duo Manual De Instalación Y Funcionamiento

To adjust settings, select your monitor connected via Ethernet and USB, and click on the
settings icon below the monitor name. This will open the settings page for your selected
monitor. When you are happy with your settings, click the save button to save your settings and
return to the SmartView setup home page.
See the next section for information on settings that are available for Blackmagic monitors and
how to apply them. For information on how to configure network settings using Blackmagic
SmartView setup, turn to the section "adjusting network settings".
Blackmagic SmartView setup automatically searches for any
SmartView and SmartScope units connected locally via USB
or over a network. When updating your monitor's internal
software make sure your monitor is connected via USB or
Ethernet. A USB icon will appear next to your monitor's name.

Monitor Settings

To adjust settings and displays for each monitor, they must be connected via Ethernet or USB.
Select the monitor you wish to set by clicking on the left and right arrow icons on the SmartView
setup home page, then clicking on the settings icon under your monitor name. The settings
page is automatically customized to suit the features supported by your selected
Blackmagic monitor.
With SmartScope you can select between scopes or video
monitoring from the 'display' drop down menu
Using Blackmagic SmartView Setup 9