Frequently Asked Questions - Domo DO214SV Manual De Instrucciones

www.domo-elektro.be
We advise replacing the filter regularly to ensure an optimal operation of the machine.
A dirty filter will reduce the suction power drastically. After every cleaning, clean the
dust reservoir and the filter to extend the life span of your machine.
Cleaning the floor brush:
1. To remove the floor nozzle push in the small metal pin at the
back of the appliance with a thin object, e.g. a screw driver.
When the pin is pushed, you can remove the floor nozzle by
pulling it.
2. Turn the release under the floor nozzle to the left using a
screwdriver or coin, and remove the closure flap.
3. Remove the rotating floor brush from the floor nozzle.
4. Remove hairs and other dirt that have wrapped around the
floor brush. If you do not clean the floor brush regularly,
it will become damaged and your machine will become
unusable. The rotating floor brush cannot be rinsed with
water.
5. Place the floor brush back into the floor nozzle when it is clean.
6. Put the closure flap back in place and secure by turning the release clockwise.
7. Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can damage the machine or your floor. Always remove the hairs stuck on
the brushes.
Cleaning the machine:
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never
submerge the machine in water!
Storing the machine:
• Store the machine in a dry and clean place. Avoid extreme temperatures and long-
term exposure to sunlight.
• Place the appliance in lock-postion for easy storage. The appliance can remain in
the upright position.

FREQUENTLY ASKED QUESTIONS

The machine does not start up. - The battery is empty
- Charge the machine.
- The hand-held vacuum cleaner is not correctly
mounted on the stick vacuum cleaner.
Make sure that the hand-held vacuum cleaner is
correctly installed.
37
DO214SV