Operation And Settings - Sissel Hang Up Manual De Instrucciones

Operation and settings

1. Shorten
The strap
In the interests of safety, a nylon strap for controlling and limiting the inversion gradient is
enclosed. This strap can be set to various lengths, which allows a greater or lesser inversion
gradient.
1. To shorten the strap, thread the lower end into the strap buckle and pull at the upper
end.
2. To lengthen the strap (32), thread it into the upper end of the strap buckle and pull at the
lower end.
Adjusting the arm
The adjustable arm (3) can be individually set to several positions depending on the user's
body length. Loosen the knob (30) and pull out the spring button (18) until you can move the
arm up or down. Set the desired length, release the spring button and slide the arm up or
down slightly until it "springs" into the set position. Now retighten the knob (30).
TIP: Because different individuals have different centres of gravity, the scale provides a
setting recommendation in the first instance. Before training for the first time, set the
scale to a minimum of 5 cm below your known body height and feel, by approaching
gradually, for the position that is ideal for you.
AG 02 V4
2. Lengthen
37 / 80