Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Connecting the Water Supply
([select models)
Materials
Needed:
• '/4"outer diameter flexible copper tubing
• Shut-off
valve (requires
a '/4" hole to be drilled into
water supply line before valve attachment)
• Adjustable
wrench (2)
• '/_" hex nut driver
Notes:
• Use copper tubing only for installation.
Plastic is
less durable and can cause damage.
• Add 8' to tubing
length needed to reach water
supply for creation of service loop.
.
.
Create service loop with
copper tubing
(minimum
2'
diameter). Avoid kinks in the
copper tubing when
bending the service loop. Do
not use plastic tubing.
Remove plastic cap from water valve
inlet port.
2' diameter
minimum
.
Place brass nut (A) and sleeve (B)
on copper tube end as illustrated.
Reminder:
Do not use an old
sleeve. The nut and sleeve are
provided in the Use and Care
packet.
.
Place end of copper tubing
into
water valve inlet port. Shape
tubing slightly. Do not kink - so
that tubing feeds straight into inlet
port.
-B
Publicidad
