Corghi SP 2300 Manual De Uso página 28

• Install the arm with bead breaker disc on the power unit fig. 6
• Fix the mobile arm to the power unit (fig. 7)
• Fix the grease cone holder to the power unit (fig. 8).
• Install the filter/lubricator unit on the back of the power unit in the position shown in fig. 9.
• Fix the bundle of pneumatic pipes leading from the mobile arm to the power unit using the clamps
supplied (Fig. 9).
• Connect the 2 small diameter pneumatic pipes to the power unit cylinder. Fix the pipe leading to
28 SP 2300 - Operator's manual + spare parts
6
7