Maintenance; Replacing The Battery; Cleaning Recommendations - Promax PROLITE Serie Manual De Instrucciones

Fuente de luz láser
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USER'S MANUAL. PROLITE-90

5 MAINTENANCE

The method of maintenance to be carried out by the user consists of cleaning
the cover and changing the battery. All other operations should be carried out by
authorised agents or by personnel qualified in the servicing of instruments.

5.1 Replacing the Battery

The battery (CB-042) should be replaced when you notice that its capacity,
once it has been charged, has decreased considerably. To change the battery follow
next procedure.
1. Switch off the instrument.
2. Remove the back cover by first extracting the 4 securing screws.
3. Disconnect the battery cable from the instrument main board.
4. Replace the battery with a new one.
5. Place and secure the battery holder with the 2 screws.
6. Place and secure the back cover with the 4 screws.

5.2 Cleaning Recommendations

To clean the cover, take care the instrument is disconnected.
Do not use scented hydrocarbons or chlorized solvents. Such products may
attack the plastics used in the construction of the cover.
The cover should be cleaned by means of a light solution of detergent and
water applied with a soft cloth.
Dry thoroughly before using the system again.
Do not use for the cleaning of the front panel and particularly the viewfinders,
alcohol or its derivatives, these products can attack the mechanical properties of
the materials and diminish their useful time of life.
12/2003
CAUTION
CAUTION
CAUTION
Page 13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Prolite-90Prolite-80Prolite-81Prolite-20Prolite-21

Tabla de contenido