during working in order to prevent slipping.
If possible, avoid using the machine when
the ground is damp.
Exhaust gases:
Danger to life through poisoning!
In the case of nausea, headache,
impaired vision (e.g. decreasing
field of view) hearing disorder,
dizziness, decreasing power of
concentration, stop working
immediately. These symptoms may
be caused by excessively-high
exhaust gas concentrations.
The machine generates
poisonous exhaust gases when
the engine is running. The
gases contain poisonous
carbon monoxide, a colourless and
odourless gas, as well as other pollutants.
The engine must never be operated in
closed or poorly ventilated spaces.
Starting:
Exercise care when starting and observe
the instructions contained in the section
"Initial operation of machine". (
The machine must not be tilted during
start-up.
The self-propulsion lever must not be
pressed when starting the engine.
34
Do not start the engine if the discharge
chute is not covered by the discharge flap
or the grass catcher box.
Working on slopes:
Always work across and back on slopes,
never up and down.
If the user loses control when mowing up
and down, there is a risk of being run over
by the machine.
Be particularly careful when changing
direction on a slope.
Always ensure good stability on slopes
and avoid mowing on excessively steep
slopes.
For safety reasons, the machine must not
be used on slopes with an inclination of
more than 25° (46.6 %). Risk of injury!
A slope inclination of 25° corresponds to a
vertical height increase of 46.6 cm for a
100 cm horizontal distance.
10.)
In order to ensure an adequate oil supply
for the engine, the information in the
accompanying engine instruction manual
must be additionally observed when using
the machine on slopes.
Working:
Risk of injury:
Never place your hands or feet
above, underneath or on rotating
parts.
Do not attempt to examine the
blade while the lawn mower is
operating. Never open the
discharge flap and/or remove the grass
catcher box when the mowing blade is
running. Rotating blades can cause injury.
Only operate the machine at walking
speed – never run when working with the
machine. Working quickly with the
machine increases the risk of injury due to
stumbling, slipping, etc.
Be particularly careful when turning the
machine around or pulling it towards you.
Risk of stumbling!
Objects hidden in the grass (lawn sprinkler
systems, posts, water valves, foundations,
electrical wires, etc.) must be avoided.
Never intentionally run over any such
foreign objects.
Beware of the cutting tool
running on for several seconds
before coming to a standstill.
Stop the engine, allow the work
tool to come to a complete
standstill and detach the spark plug socket
0478 111 9920 B - EN