Rothenberger ROWELD P 250 B Instrucciones De Uso página 31

Risk of serious injury! The heating plate can reach temperatures of over 300°C
(575°F)! We highly recommend storing the heating plate in the designated
carrying frame immediately after use!
Pressing longer on the button (7) shuts off the heat. The dot on the display (9) goes off.
Pressing again turns the heat back on.
ROWELD P500-630/18-24B Plus hydraulic unit: Check the direction of rotation! The
machines are clamped to turn clockwise at the factory. Open and close the machine with the
hydraulic unit. If there is no movement, use an appropriate tool to switch the phase inverter
on the electrical plug.
Note: Do not turn the hydraulic unit on if the direction of rotation is wrong (this may destroy
it).
 Enter or select the welder name „Operator".
In the entry form, saved welders can be selected, new welder names can be entered, and
existing welder names can be deleted with DEL and reentered. All entry forms are confirmed
and saved with the ENTER or OK button, and the next program step is called up. The EXIT
button closes the entry form without saving it.
 Enter or select a project.
The entry forms can be used to select saved projects or enter new project names. Close and
save using the ENTER key.
 Select a pipe.
ENGLISH 29