Using The Fm/Am Radio; Manual Tuning - Panasonic SC-AK770 Instrucciones De Funcionamiento

Using the FM/AM radio

Manual tuning

Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [4, / REW] or [¢,
of the required station.
" " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4, / REW] or [¢,
starts changing rapidly. The unit begins auto tuning, stopping when
it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4,
[7, CLEAR].
To improve the sound quality
When "FM" is selected.
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO" disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
When "AM" is selected
Press and hold [PLAY MODE].
Each time you press button: BP1
• The setting is recalled whenever "AM" is selected.
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz
steps.
To change the step from 0.1 MHz
1
Press and hold [FM/AM].
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
2
Continue to hold down [FM/AM].
• When the minimum frequency changes, release the button. To
return to the original step, repeat the above steps.
• After changing the setting, previously preset frequency will be
cleared.
/ FF] to select the frequency
/ FF] until the frequency
/ REW] or [¢, / FF] or
BP2
Memory preset Memory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
1
Press [PLAY MODE] to select "MANUAL".
2
Press [4, / REW] or [¢,
station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
For channels 10 to 30 press [h10], then the two digits.
The station occupying a channel is erased if another station is
preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1
Press [PLAY MODE] to select "PRESET".
2
Press [4, / REW] or [¢,
/ FF] to tune to the required
/ FF] to select the channel.
27
RQT8043