Using The Timers; Setting The Clock - Panasonic SC-AK770 Instrucciones De Funcionamiento

Using the timers

Setting the clock

Setting the clock
This is a 12-hour clock.
1
Press [CLOCK / TIMER] to select "CLOCK".
Each time you press the button:
˚ PLAY
CLOCK
Original display
2
( )
Within 8 seconds or so
Press [4, / REW] or [¢,
3
Press [CLOCK / TIMER] to fi nish setting the time.
Displaying the clock
Press [CLOCK / TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer Using the play or record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or the external equipment
(record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette, disc number (1 to 5), radio or other
equipments, and set the volume.
Record Check the cassette's erasure prevention tabs
\
timer ( page 10), insert the cassette and tune to the
\
radio station (
\
or AUX source (
1
Press [CLOCK/TIMER] to select the timer function.
Each time you press the button:
˚ PLAY
CLOCK
Original display
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
within 8 seconds
2
Press [4, / REW ] or [¢,
Start time
Play timer indicator
3
Press [CLOCK / TIMER] to confi rm.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
˚ REC
/ FF] to set the time.
page 27) or select the music port
page 14).
˚ REC
)
/ FF] to set the starting time.
Record timer indicator
4
Repeat steps 2 to 3 to set the fi nishing time.
Finish time
To activate the timer
5
Press [ ˚PLAY/REC] repeatedly to turn on your desired
timer.
˚ PLAY
no display
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operations
To Action
Change the
Repeat steps 1 to 4 and 6 (
settings
above).
1) Press [ ˚PLAY/REC] to clear the timer
Change the
source or indicator from the display.
volume 2) Make changes to the source or volume.
3) Perform steps 5 to 6 (
Check the Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
settings
Press [ ˚PLAY/REC] to clear the timer
Cancel
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape or disc are loaded before
turning the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
• If MUSIC PORT or AUX or USB is selected as the source when
the timer comes on, the system turns on and engages MUSIC
PORT or AUX or USB as the source. If you wish to playback or
record (MUSIC PORT or AUX) from the other equipments, just
activate the equipments' play mode and increase the volume.
(See the other equipments' instruction manual.)
˚ REC
(off)
\
see left and
\
see above).
Sp En
RQTV0281-3M
L0408KE3058