Publicidad
WARNING: FAILURE TO HEED ALL SAFETY AND OPERATING INSTRUCTIONS AND WARNINGS REGARDING USE OF THIS
PRODUCT CAN RESULT IN SERIOUS BODILY INJURY.
DO NOT attempt to assemble or operate your
wolfcraft
®
Quick Jaw
read the safety instructions in this section.
Safety items throughout this manual are labeled
with WARNING or CAUTION.
Means that failure to follow this
WARNING
safety statement may result in
extensive product damage, serious personal
injury or death.
Means that failure to follow this
CAUTION
safety statement may result in
minor or moderate personal injury, property or
equipment damage.
DO NOT use this tool for
WARNING
scaffolding or as a ladder. Make
sure to insert pin and fully tighten handles when
in use. Maximum capacity 250 lbs.
Read all instructions.
WARNING
DO NOT attempt to use your portable
workbench unless the jaw is securely locked in
position.
DO NOT load tool stand with more than 250
pounds.
DO NOT apply an unbalanced load which could
result in the workbench tipping over.
DO NOT stand or climb on the workbench. It
could fall or tip over causing serious injury.
Be sure the workbench's leg set frame
assembly is in the fully opened position before
using.
When operating a stationary power tool, such as
a miter saw, on your workbench, be sure the tool
is securely bolted to a separate piece of
SAFETY INSTRUCTIONS
®
Workbench until you have
plywood and the plywood is securely clamped to
the portable workbench. DO NOT clamp or
mount stationary power tools directly to table
top. This could cause serious bodily injury.
When operating a portable power tool such as a
drill, router, sander or planer: Always be sure
that the workpiece is securely clamped to your
workbench. This will avoid kickback which could
cause serious bodily injury.
When using a power tool with the workbench,
ALWAYS follow the safety instructions in the
power tool owner's manual.
ALWAYS wear safety glasses or eye shields
when operating power tools.
To prevent personal injury while opening or
closing your workbench, always avoid
positioning hands or fingers where they could
get pinched.
Dress for safety. DO NOT wear loose clothing,
gloves, neckties or jewelry (rings, watches); they
can get caught and draw you into moving parts.
ALWAYS wear non-slip footwear; tie back long
hair.
DO NOT store workbench
CAUTION
outdoors or in a damp location.
ALWAYS
keep your work area clean,
uncluttered and well lit. DO NOT work on or
place workbench legs on floor surfaces that are
slippery from sawdust, oil, water or wax.
Keep visitors and children a safe distance away
from
the work area, especially when you're
operating a power tool. Visitors should wear the
same safety equipment as the operator.
SAVE THESE INSTRUCTIONS.
2
Publicidad
