IMPORTANT SAFETY WARNINGS
ADJUSTMENT PRECAUTIONS:
1. NEVER alter or modify the equipment, be sure any accessory items and
system components being used will withstand the pressure developed.
Use ONLY genuine Mi-T-M parts for repair of your pressure washer.
Failure to do so can cause hazardous operating conditions and will void
warranty.
2. NEVER make adjustments to the machinery while it is connected to the
engine without first removing the ignition cable from spark plug. Turning
the machinery over by hand during adjustment or cleaning might start
the engine and machinery with it, causing serious injury to the operator.
3. Know how to stop the pressure washer and bleed pressures quickly.
Be thoroughly familiar with controls.
4. Before servicing the unit; turn the unit off, relieve the water pressure, and
allow the unit to cool down. Do not make repairs while unit is running.
Service in a clean, dry, flat area. Block the wheels to prevent the unit
from moving.
5. Follow the maintenance instructions specified in this manual.
! SAVE THESE INSTRUCTIONS !
CM-Direct Driven Operator's Manual 1996
7