Indication Channels - Sonnenkraft SKSC2HE Manual Del Usuario

4.1.1. Indication of collector temperatures
COL, COL1, COL2:
Collector temperature
display range:
-40 ... +250 °C
4.1.2. Indication of store temperatures
TST, TSTL, TSTU,
TST1, TST2:
Store temperatures
Display range:
-40 ... +250 °C
4.1.3. Indication of sensor 3, sensor 4, and VFD
S3, S4:
Sensor temperatures
Display range:
-40 ... +250 °C
VFD: 0 ... 100 °C
4.1.4. Indication of other temperatures
TFSB, TRET, TFL,
TRF, TKV:
Other mea suring
tempe ratures
Display range:
-40 ... +250 °C
4.1.5. Indication of flow rate
l/h:
Flow rate
Display range:
0 ...2400 l/h
48
Shows the current collector temperature.
• COL : collector temperature
(1-collector-system)
• COL1 : collector temperature 1
• COL2 : collector temperature 2
Shows the current store temperature.
• TST : store temperature (1-store-system)
• TSTL : store temperature lower
• TSTU : store temperature above
• TST1 : temperature store 1
• TST2 : temperature store 2
Shows the current temperature of the corre-
sponding additional sensor (without control func-
tion).
• S3 : temperature sensor 3
• S4 : temperature sensor 4
• VFD : temperature GF Vortex sensor
Please note:
S3 and S4 are only indicated if the temperature
sensors are connected. VFD is only indicated if a
GF Vortex sensor is activated.
Shows the current temperature of the corre-
sponding sensor.
• TFSB : temperature solid fuel boiler
• TRET : temperature heating reverse raising
• TFL : temperature forward flow
• TRF : temperature return flow
• TKV : temperature boiler flow
Please note:
TFL/TRF is only available in case of an activat-
ed option heat quantity measurement (OHQM).
TKV is available in arrangement 3 only.
Shows the current flow rate at the VFD flow rate
sensor.
The display range depends on the sensor type
selected.
GB