plaY DETECTOr TECHNICal DaTa
Mobile plate size ................................................................................................. 570x355 mm
plate diagonal stroke ..................................................................................................... 65 mm
Longitudinal / transverse stroke .................................................................................. 46 mm
Single plate translation force ...................................................................................... 7,000 N
Hydraulic operating pressure ..................................................................................... 150 bar
Maximum load per axle .............................................................................................. 25,000 N
Halogen lamp ........................................................................................................... 12V / 20 W
Work environment conditions
Operating temperature .....................................0°C
Humidity range ................................................................................................ 57/95% to 40°C
lIFT MODEl DESCrIpTION
Fig. 2
Main lift components
1
Base
2
Inside scissors element
3
Outside scissors element
4
Runway structure
5
Vehicle stop barrier
6
play detector (version with pLAY DETECTOR only)
7
Slip plates
8
Flap
9
Fixed up-going ramp
10 Mechanical safety device
11 pneumatic cylinder for safety device release
12 Hydraulic cylinder
13 Control unit controls cover
14 Control unit
Components of built-in free-wheel lift table
T1 Hydraulic cylinder
T2 Runway
T3 pull-out extension
T4 Outside scissors element
T5 Inside scissors element
64
min
max
45°C
Operator' s manual