General Safety Regulations; Transport - Corghi ERCO X4300 Serie Manual De Uso

GENEral SaFETY rEGUlaTIONS

This equipment is for professional use only.
WARNING
Only one operator may work with the equipment at a time.
The lift must only be used by specifically trained, authorised staff.
Any tampering with or modification of the equipment not authorised in advance by the
manufacturer relieves the latter of responsibility for damage deriving from or due to
such procedures.
Removal of or tampering with the safety devices constitutes a violation of European
Regulations on safety. The manufacturer therefore declines all liability deriving from
tampering with these devices.
- The machine may only be used in places free from explosion or fire hazards.
- Original accessories must be used. Our machines are designed to take original acces-
sories.
- Installation must always be carried out by qualified staff in full accordance with the
instructions given below.
- Make sure there are no risky conditions while the equipment is being operated: in case
of malfunctioning, stop the machine at once and consult the technical support service
of the authorised dealer.
- Standing underneath the vehicle during raising and lowering is forbidden.
WARNING
Even minor work on the electrical system must be done by professionally qualified
staff (see specific legislation on this subject).
The machine, in its packaging, must be transported in accordance with the instructions
provided below:
- protect the control unit from exposure to the weather and ensure that it is not subjected
to substantial variations in temperature. Since it is in its packaging, it must be handled
with a pallet truck or fork-lift truck, inserting the forks in the points shown in figure 3.
- As the lift structure is of considerable size, it is packaged with a wooden structure which
allows slinging with suitable slings. Never use steel ropes. The positions of the slings
and the hook are indicated in figure 4. For correct lifting, with the slings taut the hook
should be at least 2.5 m from the packaging.
Operator' s manual

TraNSpOrT

UK
67