Identifying Parts And Controls - IBM P260 Manual De Instrucciones

Identifying Parts and Controls

See the pages in parentheses for further details.
Front
1- -2
1 ? (reset) button (page 15)
Resets the adjustments to the factory settings.
2
ASC (auto sizing and centering) button
(page 5)
Automatically adjusts the size and centering of the
picture.
3 Input switch (page 5)
Selects the INPUT 1 (video input 1 connector: J1) or
INPUT 2 (video input 2 connector: J2) video input
signal.
4 ¨ (brightness) down and up (./>) buttons
(pages 6 – 15)
Adjust the picture brightness.
Function as the (./>) buttons when adjusting other
items.
5
(menu) button (pages 6 – 16)
Displays the MENU OSD.
6 > (contrast) left and right (?//) buttons
(pages 6 – 14, 20)
Adjust the contrast.
Function as the (?//) buttons when adjusting other
items.
7 u (power) switch and indicator (pages 16,
20)
Turns the monitor on or off.
The power indicator lights up in green when the
monitor is turned on, and either flashes in green and
orange, or lights up in orange when the monitor is in
power saving mode.
Rear
AC IN
(HD15)
1
8 AC IN connector (page 4)
Provides AC power to the monitor.
9 Video input 1 connector (HD15) (J1)
(page 4)
Inputs RGB video signals (0.700 Vp-p, positive) and
sync signals.
5 4 3 2 1
10 9
15 14
Pin No. Signal
1 Red
2 Green
(Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
* Display Data Channel (DDC) Standard of VESA
Getting Started
(DVI)
2
8 7 6
13 12 11
Pin No. Signal
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional
Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock(SCL)*
EN
3