Customizing Your Monitor; Selecting The On-Screen Display Language; Adjusting The Picture Brightness And Contrast; Introducing The On-Screen Display System - IBM P260 Manual De Instrucciones

Customizing Your Monitor

Customizing Your Monitor
Before adjusting
• Connect the monitor and the computer, and turn them on.
Selecting the On-screen Display
Language
If you need to change the OSD language, see "Using the
LANGUAGE On-screen Display" on page 13.
The default setting is English.
Adjusting the Picture Brightness
and Contrast
Once the setting is adjusted , it will be stored in memory for
all input signals received.
1
Press the ¨ (brightness) ./> or > (contrast) ?//
buttons.
The BRIGHTNESS/CONTRAST OSD appears.
2
For brightness adjustment
Press the ¨./> buttons.
> . . . for more brightness
. . . . for less brightness
For contrast adjustment
Press the >?// buttons.
/ . . . for more contrast
? . . . for less contrast
The OSD automatically disappears after about 3 seconds.
To reset, press the ? (reset) button while the OSD is on.
The brightness and contrast are both reset to the factory
settings.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR OSD, the
following BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
5 6
s RGB :
For more information about using the sRGB mode, see
"Using the COLOR On-screen Display" on page 11.
The menu automatically disappears after about 3 seconds.
6
BR I GHTNESS / CONTRAS T
2 6 2 6
7 6
5 6 7 6
Introducing the On-screen
Display System
Most adjustments are made using the MENU OSD.
MENU OSD
Press the button to display the MENU OSD.
This MENU OSD contains links to the other OSDs described
below.
1 EXIT
Closes the MENU OSD.
2
SIZE/CENTER
Displays the SIZE/CENTER OSD for adjusting the
picture's size, centering, or zoom.
3
GEOMETRY
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
4
CONVERGENCE
Displays the CONVERGENCE OSD for adjusting the
picture's horizontal and vertical convergence.
5
SCREEN
Displays the SCREEN OSD for adjusting the picture's
quality. You can adjust the landing and moire
cancellation effect.
6
COLOR
Displays the COLOR OSD for adjusting the color
temperature.
7
LANGUAGE
Displays the LANGUAGE OSD for selecting the
language.
8
OPTION
Displays the OPTION OSD for adjusting the OSD
position, degaussing the screen, etc.
9 The horizontal and vertical frequencies of
the current input signal
The horizontal and vertical frequencies of the current
input signal are displayed.
0 The resolution of the current input signal
If the signal matches one of this monitor's factory preset
modes, the resolution is displayed.
MENU
OK
EX I T
S I Z E / CENT ER
GEOME TRY
CONVERGENCE
SCREEN
COLOR
L ANGUAGE
OP T I ON
6 8 . 7 k H z / 8 5 H z
1 0 2 4 x 7 6 8