Charging The Speaker; Handling And Use; Switching The Speakers On/Off - Silvercrest SKBL 56 A1 Instrucciones De Uso

Charging the speaker

► Charge the speakers only in dry interior spaces.
Before using the speakers, the integrated batteries must be completely
charged.
♦ Make sure that the speakers are turned off . If a device is turned on, the
operating/charging LED
approx. 2 seconds to turn off a device.
♦ Connect the USB plugs on the charger cables
power supply.
♦ Connect the micro-USB plugs on the charger cables
USB charging sockets (POWER INPUT)
The operating/charging LED
When the battery is fully charged, the charging LED turns off .
SKBL 56 A1
lights up. Press the button for
to a PC or to a USB
to the micro-
on the speakers.
lights up orange during recharging.
Charging takes about 3 hours at a charging current of 500 mA. When
the battery is fully charged, you can play back music for about 4 hours
at a medium volume. The playback time may vary depending on usage
(volume).
When the battery is empty, you will hear two sounds at intervals of just a
few seconds, and the operating/charging LED
every 15 seconds. The device then turns off automatically.

Handling and use

This section provides important information on handling and using the
device.
Switching the speakers on/off
♦ Press and hold the
speaker on and activate the Bluetooth
sound and the operating/charging LED
♦ Press and hold the
speaker off and deactivate the Bluetooth
sound. The operating/charging LED
will fl ash orange twice
button for about 4 seconds to turn a
function. You will hear a
®
will fl ash orange und blue.
button for about 2 seconds to turn one
function. You will hear a
®
will turn off .
US-EN 7 ■
│