Operating The Speakers In Stereo Mode - Silvercrest SKBL 56 A1 Instrucciones De Uso

The next time you turn on the speakers, they will connect automatically to
the most recently connected Bluetooth
device does not automatically reconnect, you will have to re-establish
the connection manually. A detailed description of how to do this can be
found in the oper ating instructions for your Bluetooth
If you want to connect the speaker to another Bluetooth
must fi rst unpair the current Bluetooth
the button and the
speaker for about 2 seconds until you hear a sound. Alternatively, you
can terminate the connection on your Bluetooth
you will also hear a sound.
SKBL 56 A1
device. If your Bluetooth
® ®
device.
®
® device, you
device. To do this, hold down
®
button ( ) of the aff ected
device. In this case,
®

Operating the speakers in stereo mode

You can also operate both speakers at the same time from the same
device. In this case, each speaker will play back one audio
Bluetooth ®
channel.
♦ Make sure that the speakers are turned off and the Bluetooth
device is turned on.
♦ Set the Bluetooth ® device so that it scans for other Bluetooth
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
♦ Press and hold the
speaker on and activate the Bluetooth
sound and the operating/charging LED
If the speaker connects automatically to an already paired
® playback device, then deactivate this connection. To do
Bluetooth
this, hold down the
of the aff ected speaker for about 2 seconds until you hear a sound.
device.
®
button for about 4 seconds to turn a
function. You will hear a
®
will fl ash orange und blue.
button and the button (
US-EN
®
®
)
9 ■
│