Troubleshooting - Silvercrest SKBL 56 A1 Instrucciones De Uso

Troubleshooting

If you cannot pair the speakers to a compatible Bluetooth
proceed as follows:
♦ Make sure that the Bluetooth
When a device is connected via a 3.5 mm (0.14") jack cable, the
® function is deactivated.
Bluetooth
♦ Ensure that the speaker is turned on.
♦ If you use several music devices, ensure that any previous connection is
disconnected (see section Function of the buttons for music playback).
There may be a previously paired device within range.
♦ Make sure that the speakers are no more than 32 ft from the Bluetooth
device and each other. Make sure that there are no barriers or elec-
tronic devices placed between them.
SKBL 56 A1
music device,
®
function is activated on the music device.
®
Device does not turn on.
♦ The integrated battery is not charged.
Charge the battery (see section Charging the speaker).
No sound.
♦ The volume on the device or the playback device is set to mute.
Increase the volume on the device or on the playback device.
♦ Playback has not been started on the playback device. Start playback
on the playback device.
The two speakers will not connect to each other.
♦ The speakers are not in pairing mode. To change this, press and hold
the button and the
®
speakers for about 2 seconds until you hear a sound. Wait a moment
until the speakers have connected to each other.
If you cannot solve the problem with the above-mentioned solutions,
please contact the service hotline (see Warranty section).
button ( )of one of the
US-EN 13 ■
│