Operating The Speakers In Mono Mode - Silvercrest SKBL 56 A1 Instrucciones De Uso

If the two speakers are coupled with each other via Bluetooth
both speakers will turn off as soon as you turn off one speaker.

Operating the speakers in mono mode

Upon delivery, the default preset of the speakers is in mono mode. This
means you can pair each speaker with a playback device. Before you
can use the speakers, you must pair them with a compatible Bluetooth
device.
♦ Make sure that the speakers are turned off and the Bluetooth
device is turned on.
♦ Set the Bluetooth device so that it scans for other Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
♦ Press and hold the
speaker on and activate the Bluetooth
sound and the operating/charging LED
■ 8 │ US-EN
®
® device.
button for about 4 seconds to turn a
function. You will hear a
®
will fl ash orange und blue.
, then Make sure that the speakers are no more than 32 ft from the Bluetooth
device and each other. Make sure that there are no barriers or electronic
devices placed between them.
♦ Select SKBL 56 A1 from the list of found devices on your Bluetooth
device to pair the two devices. You will hear a short sound when the
connection has been established successfully. The operating/charging
®
LED will fl ash twice in 3 second intervals.
♦ If you want to operate the second speaker in mono mode with a diff erent
®
playback device, carry out the process described above
Bluetooth ®
with the second speaker. Make sure you do not turn on the second
® speaker until you have paired the fi rst speaker with a Bluetooth
playback device.
You can now use the speaker wirelessly to listen to your favourite tunes.
®
®
®
SKBL 56 A1