Aux In Mode; Automatic Switch-Off - Silvercrest SKBL 56 A1 Instrucciones De Uso

Function
Press and hold for approx. 2 seconds (for incom-
Reject call
ing calls).
Call last-dialled
Press 2 times
number

AUX IN mode

You can also listen to music from an audio device connected via a 3.5 mm
(0.14") jack cable . Stereo operation is not possible in AUX IN mode. An
existing Bluetooth connection is terminated.
♦ Make sure that both speakers are turned off .
♦ Press and hold the
speaker on. You will hear a sound and the operating/charging LED
will fl ash orange und blue.
♦ Use the 3.5 mm (0.14") jack cable
the 3.5 mm (0.14") jack socket (AUX IN)
♦ Start playback on the audio device and set the volume to a moderate level.
♦ Then set the desired volume using the
button on the speaker.
■ 12 │ US-EN
button
button for about 4 seconds to turn a
to connect the audio device to
of the speaker.
button or the
♦ Press the button if you want to mute the speaker.
If you connect a 3.5 mm (0.14") jack cable
during Bluetooth operation, the speaker will automatically switch to
®
playback from the connected device.
Automatic switch-off
If the 3.5 mm (0.14") jack socket
, the speakers automatically switch off after about 5 minutes.
Bluetooth ®
The operating/charging LED
Any existing Bluetooth connection will be terminated.
®
♦ Press and hold the
speaker back on.
The automatic turn-off function does not work while the speakers are
charging.
to one of the speakers
is not in use or their is no playback via
will go out and you will hear a sound.
button for about 4 seconds to turn a
SKBL 56 A1