Function Of The Buttons For Music Playback - Silvercrest SKBL 56 A1 Instrucciones De Uso

♦ Repeat the process with the second speaker. Wait a moment. If the speakers
do not automatically pair with each other, place one of the speakers manu-
ally into pairing mode. To do this, hold down the
and the button (
2 seconds until you hear a higher-pitched sound. Wait a moment.
As soon as the two speakers automatically pair with each other, the
operating/charging LEDs
hear a sound.
♦ Select SKBL 56 A1 from the list of found devices on your Bluetooth
device to pair it to a speaker. You will hear a short sound when the
connection has been established successfully. The operating/charging LED
on the connected speaker will also permanently light up orange.
This speaker will output the left stereo channel.
■ 10 │ US-EN
) of the aff ected speaker for about
of both speakers will light up blue. You will
The next time you turn on the speakers, they will connect automatically to
button
each other. To unpair the speakers, proceed as follows.
If you want to connect the speaker to another Bluetooth
must fi rst unpair the current Bluetooth
the button and the
speaker for about 2 seconds until you hear a sound. Alternatively, you
can terminate the connection on your Bluetooth
®
you will also hear a sound.

Function of the buttons for music playback

Button
►
►
device. To do this, hold down
®
button (
®
Function
Press briefl y to play/pause the music.
Press and hold until you hear a sound to turn the
speaker on or off . The device must be paired with
your Bluetooth ® device again before you can reuse it.
® device, you
) of the aff ected
device. In this case,
SKBL 56 A1