Kemper autoflow XP Manual De Instrucciones página 26

• The work space must be vacated immediately if the blower respirator system malfunctions.
• The breathing apparatus must be appropriately chosen according to type and concentration
of harmful substances.
• The blower respirator system may not be used if the tightness of the face seal on
the welding protection cover is impaired.
• Depending on how sensitive the user is, temperatures below 10°C could cause
uncomfortable wearing conditions.
• Only original particle filters approved and tested for the KEMPER autoflow XP
may be used.
• The blower respirator system may not be used in event of uncertainty with regard to oxygen
content, concentration of harmful substances or type of particles and gases in the ambient air.
In such a case, the breathing apparatuses must be used.
• Negative pressure that reduces the protective effect of the blower respirator system
may occur in the welding protection cover under a heavy workload.
• The protection factor may be reduced when the device is used in environments with high
wind speeds.
• For particularly sensitive individuals, use of the KEMPER autoflow XP
cause skin irritation or allergic reactions.
• Also observe additional operating instructions that are included with this product,
e.g. for the welding protection cover KEMPER autodark
Note:
The manufacturer cannot guarantee safe use of the blower respirator system in the event
of non-observance of the above mentioned guidelines. The manufacturer does not assume
liability for damages caused by improper usage. According to EN 12941, the licence is not
valid in the event of improper usage or the use of unapproved parts or components.
26
may
®
®
750.
®