Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENT OF HANDLE
the handle and adjust the handle to the desired position (1, 2, 3 or
4). Release the buttons.
The handle can be adjusted to 4 positions :
Position 1 - For installation in vehicle.
Position 2 - For carrying your child (well secured by harness) or for
installation on stroller.
Position 3 - Rocking position of reclined cradle function or for ins-
tallation on stroller.
Position 4 - Fixed position of reclined cradle function.
(1)
(4)
(4)
CONDITIONS OF USE IN A VEHICLE
The car seat must always be installed facing rearward (fa-
cing the back of the vehicle), on either a front seat without
Airbag or a rear seat.
The car seat must only be installed on forward-facing pas-
senger seats. It is only suitable for use in the listed vehi-
to ECE Regulation No. 16 or other equivalent standards.
Never install the car seat on a passenger seat which is
equipped with Airbag or which is rearward- or sideward-
facing.
INSTALLATION OF CAR SEAT IN VEHICLE
by referring to the previous paragraph, you could install the car seat in your vehicle.
1. Place your car seat rearward-facing on a passenger seat without Airbag, which is forward-facing
and which is equipped with compatible and compliant safety-belts. The handle of your car seat must
imperatively be blocked in position 1. Never place your car seat in the vehicle with handle in position
2 or 3 or 4.
(2)
WARNING : Always ensure that
the handle is well blocked in
one of the 4 positions : 1, 2 ,3 or
4 before using the car seat : The
handle must not move without
(3)
EN
(A)
Publicidad
