Resistance Measurement (Ω) - Minipa ET-3702 Manual De Instrucciones

D. Resistance Measurement (Ω Ω Ω Ω Ω )
CAUTION
To avoid damages to the meter or to the devices under test, discon-
nect the circuit power and discharge all high voltage capacitors
before taking resistance measurement.
Set the rotary switch to Ω Ω Ω Ω Ω . Use the RANGE key to manual selection
between the 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ and 40MΩ ranges.
NOTE:
• Make sure there is no Voltage in the circuit or device under test.
• The display will show OL when the circuit or device under test is
opened, or when the resistance value is higher than selected range.
11