Capacitance Measurement (F) - Minipa ET-3702 Manual De Instrucciones

G. Capacitance Measurement ( )
CAUTION
To avoid damages to the meter or to the devices under test, discon-
nect the circuit power and discharge all high voltage capacitors
before taking capacitance measurement.
Set the rotary switch to . Use the RANGE key to manual selection
between 4µF, 40µF, 400µF and 4mF ranges.
NOTE:
• Observe the correct polarity for polarized capacitors.
• The meter can delay to measure high values capacitors.
• If the display shows "dS.C", discharge the capacitor before testing.
14