melitta Caffeo BISTRO Manual De Instrucciones página 81

Problem
The brewing unit
can no longer be
reinserted after
removal.
The buttons for
one- and two-cup
dispensing
fl ash alternately with
the ON/OFF button
.
Continuous fl ashing
of all buttons
Please contact the Melitta
solve the problem: +49 571/ 86 1900.
Cause
The brewing unit is not
properly locked.
The actuator is not in the
proper position.
The brewing unit is
missing or is not properly
inserted.
The brewing chamber is
overfi lled.
System error
hotline, if the above mentioned solutions do not help to
®
Solution
Check whether the handle
for locking the brewing unit is
correctly engaged.
Switch the appliance off and
on again, an then press the
buttons for one- and two-
cup dispensing
simultaneously for longer
than 2 seconds. The actuator
moves into position. Then
reinsert the brewing unit and
make sure it is correctly locked
into place.
Insert the brewing unit
properly.
Switch the appliance off and
on again via the power switch
(repeat if necessary), until
standby mode is displayed.
Switch the appliance off and
on again via the power switch,
if this does not work, send
the appliance to Customer
Service.
79