ABB Totalflow NGC8206 Manual Del Usuario página 262

TERM
Coprocessor
COR
Corrected Runtime
Cos
Cosine
Counterclockwise
Counts
CPS
CPU
CPUC
CRC
Cryogenic Plant
CSA
CTS
Cubic
Cubic Centimeter
Cubic Foot
Cubic Foot Metered
Cubic Foot, Standard
Cubic Meter
Cubic Meter Per Minute
Cumulative Capacity
Página B–16
Another computer processor unit that operates in conjunction with the
standard CPU. Can be used to enhance execution speed. For example,
the 8087 is designed to perform floating point arithmetic.
See Corrected Runtime.
Correction to signal made to decrease/increase "ZERO phase" and
eliminate the shift between RT and COR for increased accuracy.
See Cosine.
The sine of the complement of an arc or angle.
Movement in the direct opposite to the rotation of the hands of a clock.
The number of time intervals counted by the dual-slope A/D converter
and displayed as the reading of the panel meter, before addition of the
decimal point.
Cycles per second; the rate or number of periodic events in one
second, expressed in Hertz (Hz).
See Central Processing Unit.
California Public Utilities Commission
See Cyclic Redundancy Check.
A gas processing plant which is capable of producing natural gas
liquids products, including ethane, at very low operating temperatures.
CSA International: Formerly Canadian Standards Association.
Canadian certification agency.
Communication abbreviation for Clear To Send.
Three-dimensional shape with six equal sides. Used in measuring
volume.
Acronym CC. Metric volume equal to a 1 Centimeter to the 3
The most common unit of measurement of gas volume in the US. It is
the amount of gas required to fill a volume of one cubic foot under
stated conditions of temperature, pressure, and water vapor.
The quantity of gas that occupies one cubic foot under pressure and
temperature conditions in the meter.
That quantity of gas which under a pressure of 14.73 psia and at a
temperature of 60 degrees occupies a volume of one cubic foot without
adjustment for water vapor content.
Acronym CM. Metric volume equal to 35.31467 Cubic Feet.
Acronym CMM. Metric flow rate equal to 35.31467 Cubic Feet per
Minute.
The total number of ampere-hours (or watt hours) that can be
withdrawn from a cell/battery under specified conditions of discharge
over a predetermined number of cycles or the cycle life.
DEFINITION
2103650-001 – rev. AB
rd
power.