Teac DV-20D Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

G
Connection to a TV
Connect the unit to your TV or monitor using one of the
following types of connectors. The connections are listed in
order of picture quality, beginning with the best possible.
Additional information on each connection type is provided
below.
If your TV or monitor is compatible with progressive scan,
connect the TV via the COMPONENT VIDEO jacks using a
component video cable, and select "PROG ON" (see page
17).
Connecting the RGB SCART output (AV CONNECTOR) using
an RGB-ready SCART cable, or connecting the
COMPONENT VIDEO jacks using a component video cable is
the next best choice.
S-VIDEO is your third choice. If your TV has an S-Video input
jack, connect the TV using a quality S-Video cable.
Composite video output (SCART-COMPOSITE or VIDEO OUT)
would be your final choice.
< For better picture quality, do not connect more than one
video cable.
< Connect this unit directly to the TV. If the TV is connected
through a video cassette recorder, you may experience
distorted picture quality during playback of a copy protected
DVD disc.
16
Connection 2
TV (MONITOR)
COMPONENT
VIDEO IN
SCART
Y P
P
B
R
D
E
VIDEO
S-VIDEO
IN
IN
Connect one of
F
these cables
D
COMPONENT VIDEO jack
If your TV or monitor has COMPONENT VIDEO IN jacks,
connect them with a quality component video cable, and
select "Component" in the Setup menu (see page 66, "Video
Output").
< If your TV or monitor is compatible with progressive scan,
connect the TV via the COMPONENT VIDEO jack and select
"PROG ON". If your TV or monitor isn't compatible with
progressive scan, do not select "PROG ON", otherwise no
picture will be shown on the monitor.
E
AV CONNECTOR
The AV CONNECTOR can output RGB or composite video
signals.
If your TV or monitor is compatible with RGB SCART, connect
the AV CONNECTOR and your TV with a 21-pin RGB-ready
SCART cable, and select "RGB" in the Setup menu (see page
66, "Video Output").
< Both audio and video signals are output from this socket.
< The audio signal output from this socket is stereo.
ENGLISH

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido