Corghi A 2030 Manual De Uso página 116

Pay attention to possible injuries.Carefully read, understand and follow the
instructions below.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in
an accident.
2. Tyres and rims that do not have the same diameter are "mismatched". Never attempt
to mount or inflate any tyre and rim that are mismatched. For example, never mount a
16" tyre on a 16,5" rim (or vice versa). It is very dangerous. Tyres and rims that do not
correspond could explode and cause accidents.
3. Never exceed the inflation pressure for the tyre indicated by the manufacturer.
Carefully check that the air hose is well inserted in the valve.
4. Never bring your head or other body parts close to a tyre during inflation or bead
insertion operations.
This machine is not a safety device against the possible risk of explosion of tyres, air
chambers or rims.
5. Maintain a suitable distance from the tyre changer while inflating. Do not approach it.
This operating phase may involve noise levels of 85 dB (A).
It is therefore suggested that ear protectors be worn.
It is suggested to wear eye protection to prevent injury due to contact
with dusts or any fragments inserted into the tyre.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly to the rim dimensions (printed inside the rim) or if the rim or the tyre is
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
116
CAUTION
CAUTION
DANGER