5. Never bring your head or
other body parts close to
a tyre during inflation or
bead insertion operations.
This machine is not a safety
device against the possible
risk of explosion of tyres, air
chambers or rims.
6. Keep a safe distance from the
tyre changer during inflation,
in order to remain outside the vertical cylinder area occupied by the wheel. Do not
approach it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly to the rim dimensions (printed inside the rim) or if the rim or the tyre is
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
7. Risk of crushing. Presence of moving parts. Contact with moving
parts can cause accidents.
The machine can only be used by one operator at a time.
• Keep bystanders away from the tyre changer.
• Keep your hands and fingers away from the rim edge during the
demounting and mounting process.
• Keep hands and fingers clear of mount/demount head during operation.
• Keep your hands and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
• Pay attention while handling the rim or the tyre and while using the
lever
8. Danger of electric shock.
• Do not clean electric parts with water or high pressure air jets.
• Do not operate the machine in the presence of a damaged electrical
cable.
• If an extension is necessary, use a cable with rated features equal to
or greater than those of the machine. Cables with rated features that are lower than those
of the machine could overheat and cause a fire.
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator's manual
DANGER
EN
79