Correcting A Leak Condition; Check Canister Tubing Connection; Indications That A Leak Condition Has Been Corrected - KCI PREVENA PLUS DUO Manual Del Usuario

CORRECTING A LEAK CONDITION

When the therapy unit detects a significant leak, a visual and audible leak alert will activate (see
Alerts section).

CHECK CANISTER TUBING CONNECTION

INDICATIONS THAT A LEAK CONDITION HAS BEEN CORRECTED

NOTE: Upon correcting a leak condition, a small delay will occur before the therapy unit senses
the correction and silences the alerts.
The therapy unit will continue the alert until condition is corrected. When leak condition has been
corrected, audible alerts will stop, and visual alerts will turn off.
1. With therapy unit on, slowly press firmly around dressing edge to
ensure good contact between adhesive and skin.
2. If a leak is identified, use PREVENA™ Patch Strips (located in dressing
package) to help seal leaks around dressing. If large wrinkles are
present, place patch strips so they run in line along the length of the
wrinkle and not across the wrinkle.
1. Ensure canister is securely locked onto the therapy unit. When
canister is installed, a distinct click will be heard indicating it has
been properly installed.
2. Check dressing tubing connector at canister.
3. Check tubing connectors to ensure they are fully engaged and
locked.
18