DESCRIPTION OF THE PRODUCT
2
GENERAL CHARACTERISTICS OF THE OPERATOR
The MAGIC operator is made to form part of an
automated system, integrated in the hanging style of
iron or aluminium swing gates.
It comprises a metal body, which contains the motor
and a planetary gear box.
Models MAS210 and MAS250 are reversible, with
encoder, meaning the installation should have an
electrolock.
Models MAS210F and MAS250F have an encoder and
a brake. An electrolock is only required for leaf lengths
of over 1.8m.
3
MAIN OPERATOR PARTS
Fig. 2
Main parts
40
Installation manual
The MAGIC operator allows opening of 180º.
This operator, along with its corresponding Erreka
control panel, allow the implementation of a soft stop
system, with the speed slowing down at the end of the
closing and opening operations.
This operator allows us to fulfil the requirements of
standard EN 12453 without the use of peripheral
elements.
Components
1
Bottom base plate with bottom
hinge
2
Bottom post plate
3
Countersunk M6 screws (8)
4
Spacer plate for iron post
5
Operator (MAS210F)
6
Countersunk M10 screws (4)
7
Bushing seal
8
Top post plate with rubber seal
9
Nuts M8 (2)
10 Top wall fixing plate
11 Top hinge
12 Glands
13 Screws M8 (2)
14 Pressure washer M8 (2)
15 Plastic cable cover
Wires
• Grey wire: motor (common)
• Brown wire: motor (rotation 1)
• Black wire: motor (rotation 2)
• Orange wire: brake
• Violet wire: brake
• Red wire: power supply (+)
encoder
• White wire: power supply (-)
encoder
• Blue wire: encoder signal
• Yellow/green wire: earth