Erreka MAGIC Manual Del Instalador página 55

Position the top wall fixing plate on the wall
1 1
1 Mark the points (1) to bore in the pillar.

Before marking the position of the needles,
ensure the assembly positions are respected (see
"Fig. 4 Assembly position for the hanging style and
the integrated operator").
2 Bore the points marked.
3 Position the top wall fixing plate (2) and secure it to
the material upon which the top wall fixing plate is
attached, using appropriate screws (3).
4 Attach the top hinge (1) to the top wall fixing plate
(2) using the pressure washers (3), screws (4) and
nuts (5).
5 Position the plastic cable cover (6) using the
corresponding screws.
MAGIC integrated electromechanical operator
INSTALLATION
51