Erreka MAGIC Manual Del Instalador página 51


Procedure
Position the base plate
1 1
Drill the holes for the attachment of the motor
1 Mark the points (1) to bore.

Before marking the position of the needles,
ensure the assembly positions are respected (see
"Fig. 4 Assembly position for the hanging style and
the integrated operator").
2 Bore the points marked.
3 Position the plate (2) and secure it using appropriate
screws (3).
1 Position the template (1) supplied with the operator,
ensuring the lower edge of the template coincides
with the base of the hanging style (2).
2 Bore the four orifices (3) where the motor will be
attached.

Use 10.5 mm broach.
MAGIC integrated electromechanical operator
INSTALLATION
47