Functions Of Deluxe System; Control Panel - HOESCH Whirlsystem Deluxe Instrucciones De Montaje

09

Functions of Deluxe system

09.01 Control panel

The bathtub with whirlpool system is ready to use when minimum water level is achived. Readyness / stand by
of whirlpool bathtub is indicated by green diode; you can fi nd the diode on the disinfection tank. (In case of additional
accesories - the control panel: it is indicated by LED diode at the bottom of the panel)
1
Press key = massage ON/OFF (highest power)
Permanent pressure = increase massage power
2
Permanent pressure = reduce massage power
3
Press key = interval ON/OFF
4
Press key = air-admix ON/OFF
5
Press key = air-bubbling ON/OFF
Permanent pressure = increase bubbling
6
Permanent pressure = reduce bubbling
Press key = interim fl ushing ON/OFF
Interim fl ushing is possible when the tub is empty and automatic fl ushing is off (no red lamp illuminated).
7
Switching off the interim fl ushing is not necessary, because it is part of a preset program and switches off
automatically.
8
Press key = light ON/OFF
Green LED diode
9
Whirltub ready to work/standby, i.e. the minimum water level has been reached
Red LED diode
10
The light is on during the rinsing process
GB
33