Setting Workpiece Height; Setting Workpiece Plate Support; Operation; Starting The Machine - HOLZMANN MASCHINEN KAM215EPSV Instrucciones De Servicio

Encoladora de cantos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

16.1.11 Setting workpiece height

16.1.12 Setting workpiece plate support

16.2 Operation

Checklist:
Machine is connected to power supply
Machine is connected to compressed air supply and the recommended pressures are set.
Both emergency stop switches are unlocked.
Glue granulate filled in
Edge band inserted and height adjustment made
Maintenance flap closed and micro-switch pressed
Dust collection system connected and ready for operation

16.2.1 Starting the machine

HOLZMANN MASCHINEN GmbH
The workpiece plate support arm can be moved in its
position in relation to the machine and can be ad-
justed in its position in relation to the machine de-
pending on the size of the plate.
To do this, release the two levers (2), move the plate
support (1) away from the machine (+) or towards
the machine (-) and fix it in the desired position
again with the levers (2).
Turn the main switch (1) to position ON (I). Turn the
switch (2) on the control panel to the "ON" position.
Select the language:
By activating one of the language selection fields in the
main menu item:
1: for English
2: for German
3: for Polish
the respective language is selected.
The operating menu is reached by pressing the menu
button (4).
5: Return to the main menu
6: Control menu (activation / deactivation of the units)
7: Temperature setting menu Glue unit
8: Parameter and error messages menu
www.holzmann-maschinen.at
With the hand crank (1) the height can be adjusted
to the height of the workpiece. The set height is
shown on the display (2).
Note: In order to obtain the most ideal contact pres-
sure, the height setting should correspond to the
height of the workpiece (max. 0.5 mm higher but in
no case lower).
OPERATION
45
KAM215EPSV

Publicidad

Tabla de contenido
loading

Tabla de contenido