Intended Use - Dometic FRIGO Instrucciones De Uso

Frigo
3

Intended use

The cooling system has been designed to cool the loading area of commercial vehi-
cles during parking and driving.
Three versions are available:
As a cooling unit for chilled goods
You can select temperatures between +40 °C and 0 °C for the cooling area.
As a cooling unit for chilled goods with constant loading area temperature con-
trol (optional)
You can select temperatures between +12 °C and 0 °C for the cooling area.
As a deep freeze unit
You can select temperatures between +40 °C and -20 °C for the cooling area.
!
CAUTION!
Food may only be stored in its original packaging or in suitable con-
tainers.
The cooling system only works when the vehicle engine is left run-
ning. Maintenance of the set loading area temperature is guaranteed
only to a limited extent when the vehicle engine is off.
During standstill of the vehicle, it is possible to maintain the temper-
ature in the loading area with the standby cooling (additional equip-
ment) by 220 V mains operation.
I
NOTE
The cooling unit for chilled goods has a sticker labelled R134a on the
evaporator.
The deep freeze unit has a sticker labelled R404a on the evaporator.
EN
Intended use
5