Puky YOUKE 12 Manual De Instrucciones página 19

SETTING THE SEAT POSITION
Adjust the seating position so that the child is seated
upright and a good overview is ensured. The handle-
bar, hand brake lever and bell must be easy for the
child to reach.
To set the seat position you will need the following
tools.
(The tools are not part of the scope of delivery.)
• 5 mm Allen key
Setting the height of the saddle: The saddle can be
pulled out after releasing the saddle clamp with the
aid of a 5mm Allen key. Set the saddle so that at least
the toes, preferably the ball of the foot, reach the
ground in order to ensure balance can be achieved
when at a standstill.
GB
43836_kinderfahrrad_148x210.indd 19 43836_kinderfahrrad_148x210.indd 19
Please observe the following principles:
STEEL/-CLASSIC / YOUKE 12: 45 cm
STEEL/-CLASSIC / YOUKE 16: 49cm, CYKE 16: 48
cm / LS-PRO 16: 45 cm
STEEL/-CLASSIC / YOUKE 18: 53cm, CYKE 18: 51
cm / LS-PRO 18: 50 cm
Maximum height of the saddle:
The minimum insertion depth of the saddle post
is 65 mm. There is an appropriate marking on the
saddle post.
Then retighten the saddle clamp (torque 5-8 Nm).
09.06.2020 07:50:27 09.06.2020 07:50:27
19