Puky Ceety Manual De Instrucciones página 11

17 18 19
3
1
2
1
2
2
180°
2
1
Remove push rod: Release the safety lever, Deactivate the freewheel so that the child can Turn rotary knob 180° so that handlebar locking
press the locking mechanism (spring) and step on it too: to do so, push the locking ring is activated or deactivated.
pull out the rod. against the rim until it locks. Turn crank slightly,
as it makes locking in easier.
DISMANTLING &
A B
ASSEMBLY OF THE
3 - POINT BELT SYSTEM
To assemble (A) or dismantle (B)
the 3-point belt system, you require
the following tool (not included in
the scope of delivery)
• Screwdriver (crosstip)
Lock the pierced ends of the belt to the tricycle Remove the belt by loosening the screws.
seat using the screws in the size provided.
Caution! Only tighten the screws until they
are hand-tight otherwise the plastic parts
may be damaged.
GB
11