Puky Ceety Manual De Instrucciones página 9

2a
!
5-8 Nm
Only on Ceety Comfort model: guide left screw
through the parking brake (!) opening and tighten.
5
2
!
5-8 Nm
Slide the handlebar all the way onto the fork shaft,
and tighten the screw. Firmly press down on the
spherical cap until it snaps into position. Align the
slot in the handlebar with the rear (!).
8
!
Fit the push rods and handle together.
GB
3
Remove transport lock (cardboard, rubber band)
6
1
Unscrew screws from the seat retainer.
9
!
Insert the push road into the seat retainer and lock
into place. Ensure that the locking mechanism
and take off the washer.
1
!
2
(spring) locks in correctly (!).
4
2
1
Slide the steering tube onto the fork shaft, until it
reaches the stop.. Replace the washer again.
Align the lug on the handlebar to the rear (!).
7
1
5-8 Nm
2
Mount seat and screw into position.
10
>KLICK<
!
Position the recess on the rear axle
until it locks into place.
!
9