USER GUIDE
2 USING SPECIAL MODES
To avoid your service generating false theft alerts in certain special
conditions, there are 3 Special Modes that can be used:
• Transport Mode
• Garage Mode
• Forced Unset Mode
These modes can be used separately or in any combination. It is
also possible to set the duration for each of these modes.
To set these modes, either:
1. Use the Remote Control to enter the specifi c code for Garage or
Transport mode
• To set Garage Mode, enter your Override code + 1 and press
the central button.
• To set Transport Mode, enter your Override code + 2 and
press the central button.
• To unset a special mode, enter your Override code + 3 and
press the central button.
2. Call the Secure Operating Centre to request that the system be set
to Transport, Garage or Forced Unset mode, or a combination. If
you are not sure, just describe why you think you need a Special
Mode and the operator will apply the appropriate settings.
3. If you have subscribed to the Personal with WEB option
service you can set these Special Modes yourself using the web
application. Instruction for using the web application can be found
in the web application on-line help.
2.1 Transport Mode
This mode inhibits the alerts that would be generated by unexpected
movement of the vehicle, such as the Unauthorised Movement
alerts.
Transport Mode needs to be set if the vehicle is to be transported:
• by train
• by ferry
• by vehicle transporter
• by tow truck
• or is likely to move for any other reason with the ignition off
2.2 Garage Mode
This mode inhibits the alerts that would be generated by
unexpected tampering with the vehicle, such as the sabotage
alerts.
Garage Mode needs to be set if:
• the vehicle is to be serviced
• the battery is to be disconnected
• dealer maintenance on the device is to be performed
2.3 Forced Unset Mode (for systems with Driver Card)
This mode inhibits alerts that would be generated by the vehicle
moving without the presence of the Driver Card.
5